Behringer - EURORACK UB1832FX-PRO

Ultra low-noise design 18 input 3/2-bus/line mixer, with premium microphone preamplifiers, and 24-bit multi-FX processor!

If you are looking for a capable compact mixer with a breathtaking 3D XPQ stereo surround effect and a 9-band stereo graphic EQ, this is your machine. Of course, you also get 14 balanced high-headroom line inputs, 6 INVISIBLE MIC PREAMPs (IMPs), 3 aux sends per channel (1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications and 1 post fader for internal FX or as external send). There are effective, extremely musical 3-band EQs with semi-parametric mid bands plus switchable low-cut filters on all mono channels. 2 subgroups with separate outputs for added routing flexibility and 2 multi-functional stereo aux returns with flexible routing are also there for your convenience. You will also find the integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets.

Soundboard Features

• Ultra low-noise ULN design, highest possible headroom, ultra transparent audio

• 6 new state-of-the-art, studio-grade IMP "invisable" microphone preamps with:

  • 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
  • Ultra-wide 60dB gain range
  • Lowest possible distortion 0.0007% (20Hz - 20Khz)
• Integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets including reverb, delay, chorus, compressor, tube distortion, vinylizer, and more - plus 1kHz test tone generator
• Breathtaking 3D stereo surround effect for more vitality and enhanced stereo image
• 9-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
• Effective, extremely musical 3-band EQ with semi-parametric mid band plus switchable low-cut filter on all mono channels
• Inserts on each mono channel for flexible connection of outboard equipment
• 14 balanced high-headroom line inputs with +4/-10 level selection on stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion - better than 4560 op amps
• 3 aux sends per channel
  • 1 pre fader for monitoring
  • 1 pre/post fader switchable for monitoring/FX applications
  • 1 post fader (for internal FX or as external send)
• Peak LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
• 2 subgroups will separate outputs for added routing flexibility
• 2 multi-functional stereo aux returns with flexible routing
• Balanced main mix outputs with TRS and gold-plated XLR connectors, seperate control room, headphones and stereo tape outputs
• Control room/phones outputs with multi-input source matrix
• Tape inputs assignable to main mix or control room/phones
• Switchable +48V phantom power for condenser microphones
• Long-wearing 60 mm logarithmic-taper ALPS® faders and sealed rotary controls
• Internal switch-mode power supply for maximum flexibility (100 - 240V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving
• Extremely rugged steel construction ensures long life even under the most demanding conditions
• Rack mount brackets included

Soundboard Specifications

• Microphone inputs IMP (Invisible Mic Preamp):  XLR, electronically balanced, discrete input circut

• Microphone E.I.N. (20Hz - 20kHz)
  • @ 0 Ω source resistance:  -134 dB / 135.7 A-weighted
  • @ 50 Ω source resistance:  -131 dB / 133.3 A-weighted
  • @ 150 Ω source resistance:  -129 dB / 130.5 A-weighted

• Frequency Response

  • <10 Hz - 150 kHz (-1 dB)
  • <10 Hz - 200 kHz (-3 dB)
• Gain Range:  +10 to +60 dB
• Max. input level:  +12 dBu @ +10 dB gain
• Impedance:  approx. 2.6 K Ω balanced
• Signal to noise ratio:  110 dB / 112 dB A-weighted (0 dBu in @ +22dB gain)
• Distortion (THD+N):  0.005% /0.004% A-weighted

• Line input

  • Type:  1/4" TRS connector electronically balanced
  • Impedance:  approx. 20 K Ω balanced, 10 K Ω unbalanced
  • Gain range:  -10 to +40 dB
  • Max. input level:  30 dBu

• Fade-out attenuation (cross-talk attenuation)

  • Main fader closed:  90dB
  • Channel muted:  89 dB
  • Channel fader closed:  89dB

• Frequency Response (Microphone input to main out)

  • <10 Hz - 90 kHz:  0 dB / -1 dB
  • <10 Hz - 160 kHz:  0 dB / -3 dB

• Stereo inputs

  • Type:  1/4" TRS connector electronically balanced
  • Impedance:  approx. 20 K Ω
  • Max. input level:  +22 dBu

• EQ Mono Channels

  • Low:  80 Hz / ±15dB
  • Mid:  100 Hz - 8 kHz / ±15dB
  • High:  12 kHz / ±15dB

• EQ Stereo Channels

  • Low:  80 Hz / ±15dB
  • Low Mid:  500 kHz / ±15dB
  • High Mid:  3 kHz / ±15dB
  • High:  12 kHz / ±15dB

• Aux sends

  • Type:  1/4" TS connector, unbalanced
  • Impedance:  approx. 120 K Ω
  • Max. output level:  +22 dBu

• Stereo aux returns

  • Type:  1/4" TRS connector electronically balanced
  • Impedance:  approx. 20 K Ω balanced, 10 K Ω unbalanced
  • Max. input level:  +22 dBu

• Main outputs

  • Type:  XLR, electronically balanced and 1/4" TRS connector electronically balanced
  • Impedance:  approx. 240 K Ω balanced / 120 K Ω balanced
  • Max. output level:  +28 dBu

• Control room outputs

  • Type:  1/4" TS connector, unbalanced
  • Impedance:  approx. 120 Ω
  • Max. output level:  +22 dBu

• Headphones outputs

  • Type:  1/4" TRS connector, unbalanced
  • Max. output level:  +19 dBu / 150 Ω (+25 dBm)

• DSP:  24-bit Texas Instruments™

• Converter:  24-bit Sigma-Delta, 64/128-times oversampling

• Sampling rate:  46,875 kHz

• Main mix system data: noise

  • Main mix @ -∞, Channel fader @ -∞:  -101 dB
  • Main mix @ -0, Channel fader @ -∞:  -93 dB
  • Main mix @ -0, Channel fader @ -0:  -81 dB

• Power Supply

  • Power consumption:  43 W
  • Fuse:  100 - 240 V ~:  T 1.6A H
  • Main connections:  Standard IEC recepticle

• Physical/weight

  • Dimension:  approx. 3 7/8" (97 mm) x 16 1/16" (408 mm) x 14 1/16"
  • Weight (net):  approx. 4.7 kg

Pricing

If you require assistance:
Please provide complete name and contact information (email, telephone number).
Specifically state the product in question and what information you require.

For More Information Contact:

Starr Interactive Corp. D/B/A Starr Karaoke
415 N. Ardmore Ave., Unit B - Villa Park, IL 60181
Tel: 800.990.SONG
FAX: 800.997.SONG
Internet: sales@starrkaraoke.com

Send mail to webmaster@starrkaraoke.com with questions or comments about this web site.
Copyright © 2003 Starr Interactive Corp. D/B/A Starr Karaoke
Last modified: 08/16/05